View source for How to manufacture your PCB

Venders we've had experiences with.

''Advanced Circuits''


''Tech Circuits''

http://www.techcircuits.com/prodserv.php


''Gold Phoenix''
Must buy Panel, 

1-2 layer 155sqin ($110) 100sqin ($100) 5 day
2-4 layer 155sqin ($300) 100sqin ($280) 75sqin ($250) 6 day

    * 2 or 4 layer boards - 0.062" FR4 material
    * 2 Layer sizing:
          o 7mil (~0.2 mm) spacing minimum
          o 7mil (~0.2 mm) traces minimum
          o 15mil (~0.5 mm) minimum drill size
    * 4 Layer sizing:
          o 7mil (~0.15 mm) spacing minimum
          o 7mil (~0.15 mm) traces minimum
          o 15mil (~0.33 mm) minimum drill size
          o No blind/buried vias
    * ???mil (~??.? mm) maximum drill size
    * All drill hits are plated through
    * Matte v-scored, Multipaneled
    * Board is routed to the indicated border (+$20)
    * Soldermask top side
    * 1oz Copper
    * No limit on the number of vias
    * No limit on pads or components
    * Multiple designs, multiple copies are allowed!


''Batch PCB''
Boards can be as small as 0.5" (~12.7 mm) square.

    * 2 or 4 layer boards - 0.062" FR4 material
    * 2 Layer sizing:
          o 8mil (~0.2 mm) spacing minimum
          o 8mil (~0.2 mm) traces minimum
          o 20mil (~0.5 mm) minimum drill size
    * 4 Layer sizing:
          o 6mil (~0.15 mm) spacing minimum
          o 6mil (~0.15 mm) traces minimum
          o 13mil (~0.33 mm) minimum drill size
          o No blind/buried vias
    * 500mil (~12.7 mm) maximum drill size
    * All drill hits are plated through
    * No internal routes, no v-scoring, only drill files are sent to the fab house
    * Board is routed to the indicated border (very clean edges, you can get creative with the shape as well!)
    * Soldermask both sides
    * 1oz Copper
    * No limit on the number of vias
    * No limit on pads or components
    * Multiple designs, multiple copies are allowed!
    * Any size up to 10x15", measured in inch increments (254mm x 381mm)
    * Minimum billable size 1x1" (smaller boards are allowed but rounded up)
    * Your design can be any size - 1 inch is the minimum

$10 setup fee (shown as a handling charge) - $2.50 per square inch for 2 layer designs, $8.00/sq. in. for 4 layer designs.