Fireball V90

CAD Software - This is the computer aided drafting tool you use to draw your models.

• Sketchup

CAM Software - This is the software that creates the tool paths for the milling machine to cut

• MeshCam

CNC Control Software

• Mach3

Machine Specifications

FireBall V90 CNC Router (FireBall V90) $1,334.80

• Motor/Driver Kit => 3-Axis ProboStep Motor/Driver Kit (Best)

• Drive Nuts => Anti-backlash

• Breakout Board => PBX-RF

• Ready-to-run => Large Enclosure

• Kit Power Supply Upgrade => 40VDC Linear RTR

• Spoil Board => MDF

• Mount For PC7310 or D26670 Trim Router (PCMount) $49.95

Machine Travel:

• X-Axis ~18"

• Y-Axis ~12"

• Z-Axis ~3"

Leadscrew Pitch:

• X-Axis 5 Turns Per Inch (0.2in per rev/5.08mm per rev)

• Y-Axis 5 Turns Per Inch (0.2in per rev/5.08mm per rev)

• Z-Axis 12 Turns Per Inch (0.08334in per rev/2.1167mm per rev)

Resolution: (X & Y Axis)

• Full Step 0.001"

• Half Step 0.0005"

• Quarter Step 0.00025"

• Eighth Step 0.000125"

• Sixteenth Step 0.0000625"

Spindle

• Dewalt D26670

• Speed: 30,000RPM

• Amps: 5.6Amp

• Rating: 120V AC / DC

• Collet Diameter: 1/4"

• Height: 7.5"

• Weight: 3.75 lbs