Difference between revisions of "Fireball V90"
From CunningWiki
| Line 61: | Line 61: | ||
*Dewalt D26670 | *Dewalt D26670 | ||
| − | + | *Speed: 30,000RPM | |
| − | + | *Amps: 5.6Amp | |
| − | + | *Rating: 120V AC / DC | |
| − | + | *Collet Diameter: 1/4" | |
| − | + | *Height: 7.5" | |
| − | + | *Weight: 3.75 lbs | |
Revision as of 15:05, 16 April 2011
CAD Software - This is the computer aided drafting tool you use to draw your models.
- Sketchup
CAM Software - This is the software that creates the tool paths for the milling machine to cut
- MeshCam
CNC Control Software
- Mach3
Machine Specifications
FireBall V90 CNC Router (FireBall V90) $1,334.80
- Motor/Driver Kit => 3-Axis ProboStep Motor/Driver Kit (Best)
- Drive Nuts => Anti-backlash
- Breakout Board => PBX-RF
- Ready-to-run => Large Enclosure
- Kit Power Supply Upgrade => 40VDC Linear RTR
- Spoil Board => MDF
- Mount For PC7310 or D26670 Trim Router (PCMount) $49.95
Machine Travel:
- X-Axis ~18"
- Y-Axis ~12"
- Z-Axis ~3"
Leadscrew Pitch:
- X-Axis 5 Turns Per Inch (0.2in per rev/5.08mm per rev)
- Y-Axis 5 Turns Per Inch (0.2in per rev/5.08mm per rev)
- Z-Axis 12 Turns Per Inch (0.08334in per rev/2.1167mm per rev)
Resolution: (X & Y Axis)
- Full Step 0.001"
- Half Step 0.0005"
- Quarter Step 0.00025"
- Eighth Step 0.000125"
- Sixteenth Step 0.0000625"
Spindle
- Dewalt D26670
- Speed: 30,000RPM
- Amps: 5.6Amp
- Rating: 120V AC / DC
- Collet Diameter: 1/4"
- Height: 7.5"
- Weight: 3.75 lbs
