Difference between revisions of "CombiCam"
From CunningWiki
m |
m |
||
| Line 23: | Line 23: | ||
'''How to permanently set a combination''' | '''How to permanently set a combination''' | ||
*Take off the screw to the cam and remove the "cam" and "stop cam" | *Take off the screw to the cam and remove the "cam" and "stop cam" | ||
| − | *Rotate cylinder 180 degrees | + | *Rotate cylinder 180 degrees and put "stop cam" and "cam" back on |
Latest revision as of 19:47, 14 March 2012
Installing the CombiCam
- Insert lock body through the front of the 3/4" drilled hole
- (Wood Only) Place prong washer over lock body, prongs facing wood.
- Thread Cylinder Nut and tighten.
- Attach stop cam (square piece with one round side and square hole)
- Attach straight cam (long piece with square hole)
- Secure with screw & lock washer (one piece)
Instructions for Changing combination
- The default combination is 0-0-0
- Set combination to the open number
- Locate a small hole on the outside of the lock
- Press a paper clip into this hole to press the reset button
- Rotate the combination to the new number
- Release the reset button
- Your Lock is now set!
How to permanently set a combination
- Take off the screw to the cam and remove the "cam" and "stop cam"
- Rotate cylinder 180 degrees and put "stop cam" and "cam" back on
