This tutorial will show you how to load firmware on to the Radio Controlled stepper.

This tutorial will show you how to load firmware on to the Radio Controlled stepper.  

There a couple settings you can change on the RC Stepper.

There a couple settings you can change on the RC Stepper.

For example, when you are controlling a stepper motor using the RC stepper and you move the joystick on your remote control from left to the right the stepper motor will turn exactly 360 degrees. But what if you want to it turn 720 degrees instead, or even 89.6? By tweaking and uploading the firmware you can do that.  

For example, when you are controlling a stepper motor using the RC stepper and you move the joystick on your remote control from left to the right the stepper motor will turn exactly 360 degrees. But what if you want to it turn 720 degrees instead. By tweaking and uploading the firmware you can do that. In this tutorial I'll walk you through doing just that.

There are a few assumptions I make on this page: First, I assume you are using a computer that is running windows. Second, you want to spend as little money as possible and not have to buy additional tools. And lastly, you have an Arduino laying around.

There are a few assumptions I make on this page: First, I assume you are using a computer that is running windows. Second, you want to spend as little money as possible and not have to buy additional tools. And lastly, you have an Arduino laying around.

Here is the direct download link:

Here is the direct download link:

http://sourceforge.net/projects/winavr/files/latest/download

http://sourceforge.net/projects/winavr/files/latest/download