View source for Radio Controlled Stepper Bill of Materials

These are the parts needed to put together a [[Radio Controlled Stepper]].

<tab class=wikitable sep=comma head=top>
Image,Name,Description,Distributor,Part Number,Qty
[[File:Parts_1x3Header.JPG|125px|center|]],J2,1x3 Header,Digikey,609-3464-ND,1
[[File:Parts_2x3Header.JPG|125px|center|]],J1,2x3 Header,Digikey,609-3210-ND,1
[[File:Parts_ATTINY85.JPG|125px|center|]],U1,ATTINY85,Digikey,ATTINY85-20PU-ND,1
[[File:Parts_C0.1uF.JPG|125px|center|]],C1,0.1uF,Digikey,478-5741-ND,1
[[File:Parts_R10k.JPG|125px|center|]],R3,10k Resistor,Digikey,RNF14FTD10K0TR-ND,1
[[File:Parts_TactSW.JPG|125px|center|]],S1,Tactile Switch,Digikey,P8009S-ND,1
[[File:Parts_Diode.JPG|125px|center|]],D2 D3 D4 D5,1N4004 Diode,Digikey,641-1311-1-ND,4
[[File:Parts_nFET.JPG|125px|center|]],Q1 Q2 Q3 Q4,Transistor n-FET,Digikey,497-2766-5-ND,4
[[File:Parts_3.5mmScrewTerm.JPG|125px|center|]],J3 J4 J5,2pos 3.5mm screw terminal,Digikey,ED2635-ND,3
[[File:Parts_RCSPCB.JPG|125px|center|]],PCB,Radio Control Stepper PCB,Cunning Turtle,Part Number,ct-61
</tab>