View source for Dual Servo Controller Bill of Materials

These are the parts needed to put together a [[Dual Servo Controller]].

<tab class=wikitable sep=comma head=top>
Image,Name,Description,Distributor,Part Number,Qty
[[File:Parts_1x3Header.JPG|125px|center|]],J3,1x3 Header,Digikey,609-3464-ND,1
[[File:Parts_2x3Header.JPG|125px|center|]],J1 J2,2x3 Header,Digikey,609-3210-ND,2
[[File:Parts_ATTINY85.JPG|125px|center|]],U1,ATTINY85,Digikey,ATTINY85-20PU-ND,1
[[File:Parts_C0.1uF.JPG|125px|center|]],C1,0.1uF,Digikey,478-5741-ND,1
[[File:Parts_R33.JPG|125px|center|]],R3,33 Ohm Resistor,Digikey,33QTR-ND,1
[[File:Parts_TactSW.JPG|125px|center|]],S1,Tactile Switch,Digikey,P8009S-ND,1
[[File:Parts_Zener_Diode.JPG|125px|center|]],D1,5.1V Zener Diode,Digikey,1N5231BFSCT-ND,1
[[File:Parts_Linear_Pot.JPG|125px|center|]],R2 R3,Linear Potentiometer,Digikey,CT2265-ND,2
[[File:Parts_TSC_PCB.JPG|125px|center|]],PCB,Tiny Servo Driver PCB,Cunning Turtle,Part Number,ct-63
</tab>