View source for Confetti Cannons

'''Materials'''

*1x 3/4" Copper Tee
*2x 3/4" Copper Cap 
*1x 3/4" Copper Elbow
*3x 3/4" Copper Tube Type L (Cut to 1.5")
*1x 3/4" Copper Tube Type L (Cut to 12")
*1x M5 Bolt
*2x M5 Nut
*2x M5 Washer
*2x M3 Bolt
*1x 1/4-20 Hex Bolt 2.5", threaded 3/4"
*2x 1/4-20 Nut
*1x 1.5" x 0.5" Aluminum
*1x AL C channel (Cut to 0.5")

'''Tools'''

*Copper Pipe Cutter
*Flux
*Solder
*Sand Paper 
*Torch
*Vice (Used to hold Assembly)
*Flame Resistance Surface ()
*M5 Tapping Drill Bit
*M5 Tap
*M3 Tapping Drill Bit
*M3 Tap
*Drill Press (Optional)
*Lathe (Optional)
*Miter Saw with Carbide Blade (To cut Aluminum Pieces)